Home > Exhibition > Content

Product Categories

Add:2 No 3 Lane ,LaoKeng Industry Park.Kengzhi Stree,Longgang district
Any Terminal failure will cause the entire system to fail
Jul 15, 2016

Terminal offers the following three kinds of rare fatal failure:
1. poor contact
From an external voltage of wires or cables, metal conductors inside the Terminal is the Terminal core parts. Current or signals to go with corresponding contacts on the connector. Contact must possess very good structure, stable and reliable contact adhere to the good mechanical and electrical properties.
Any Terminal failure will cause the entire system to fail
Due to the unreasonable design of contact structures, data selection error, die instability, processing size variance, the appearance of rough, heat treatment of electroplating surface treatment processes, such as unreasonable, improper Assembly, improper storage conditions and use, will be in contact poor contact caused by contact and work with the site.
2. insulation
And makes contact with the contact between the insulators were intended to enable contacts to maintain the correct placement. Insulation between contacts and case. Insulated device must possess excellent electrical properties, mechanical properties and molding performance.
Especially with the high density, the widespread use of miniaturized Terminal, the effective wall thick and thin insulators. This insulation material, precision injection mold and molding technology, introduced more stringent requirements.
Any Terminal failure will cause the entire system to fail
As the insulator surface or inside metal extra material, the appearance of dust, flux contamination such as damp, adsorption of harmful gases and organic material precipitates membrane and outer membrane fused to form an ionic conducting path and absorb moisture, mildew, ageing of insulation materials and other reasons, caused by short circuit, leakage current, breakdown, low insulation resistance insulation.
Fixed bad
Usually also provide extended contact with precise alignment and protection, insulator not only insulation. Also install positioning, locking fixed features on the device. Fixed bad, the light effects of reliable contacts caused momentary power outages, severe disintegration of the product.
State of disintegration refers to the Terminal in the plug, because the information, design, technology and other reasons caused between the plug and the socket structure is not reliable, PIN and abnormal separation of jacks, power transmission and control in control system disruption caused by serious consequences.
Due to unreliable design, material errors, wrong choice of processing, heat treatment, moulding, assembling, welding processes, such as poor quality, poor Assembly in place will not result in fixed.

Quick Navigation
  • About Us
  • Products
  • News
  • Exhibition
  • Contact Us
  • Feedback
  • Newsletter
    Enter in your email address to receive deals and coupons.
    +86-755-89711769 sales01@jiahuaxing.com